Traditionally, architraves were used to frame doors and windows. Nowadays, architraves are made from UPVC and are 50% faster to fit than traditional materials. They also don’t need to be sanded or cut. They simply require a wipe down now and then. In addition to being more cost-effective, UPVC architraves are also 100% recyclable.
In the past, architraves were often associated with classical architecture, but there are a number of new designs that can fit into any modern home. Throughout the past few decades, the modernist movement has been influencing the appearance of homes. As a result, many new architraves feature clean lines and an understated look.
They hide rough joins
The purpose of door architraves is to hide rough joints between the door frame and masonry wall. Architraves are wooden battens that cover the joint. They hide the ugly cracks but don’t seal the joint. Using architraves can conceal rough joins and give the appearance of a finished product.
The head piece of the architrave should be fitted across the side framework and lined up with the markings at the top and bottom. After this, the bottom piece should be nailed to the side framework using a 50mm lost head nail. Make sure to drive the nail a little below the surface of the architrave. Then, before painting the door, cover the nail heads with a suitable filler.
They give a room a craftsman feel
A door architrave can add architectural flair to your home and also serve as a finishing touch for your walls and doors. They are made of a thin MDF block that is slightly thicker than the architrave or skirting board and are placed at the bottom corners of doorways and windows. This door architrave small piece of wood prevents the edges of the trim from catching on the door, making the transition between the architrave and skirting board seamless.
They add a personal touch
Architrave has a very important role in home decor. While most people think of architraves as decorative features, they can serve other functions as well. They can add a personal touch to doors, as they are made to match the style of your home. Choosing the right architrave for your home is essential if you want it to look good.
When installing architraves, make sure to measure the area where you’ll be installing them. If you’re installing them above a door, make sure the architrave is thick enough for the panel pins to fit through. Also, make sure there’s a bit of overlap to cover the doorframe.